Our Top 10 Recommendations for Wayne Sump Pumps

Up-to-date pricing and reviews for Wayne sump pumps on the market

SaleBestseller No. 1

Assembled in the US with foreign and domestic parts
Top suction pump design minimizes air locks and clogging from debris in bottom of sump pit.Assembled in us, with foreign and domestic components
Stainless steel motor housing and rugged, cast iron pump base
Vertical float switch, tested to 1 million cycles!4600 GPH at 10 ft. of discharge lift
1-1/2 In. NPT Discharge for compliance with building codes

SaleBestseller No. 2

Assembled in the US with foreign and domestic parts.
Cast iron pump housing for durability
Mechanical float switch provides reliable operation and allows installation in sump basins 11" in diameter or larger
Top suction strainer filters debris and protects pump from clogging
High capacity 1-1/2" npt discharge

SaleBestseller No. 3

New and upgraded WAYNE WSS30V. Completely pre-assembled and drop in ready.
Primary pump float switch tested to 1 million cycles, up to 10X more than competitors.*
Assembled in the US with foreign and domestic parts
Protection when you need it, back up pump continues running when the power is out. For Use In 16 inch. Diameter or Larger Sump Basins
Primary pump moves up to 5100 GPH at 0 feet of head.

SaleBestseller No. 4

1/2 HP submersible sump pump made of durable cast iron
Assembled in the USA with foreign and domestic parts
Ceramic mechanical seal for work in demanding environments
1-1/2-inch discharges for maximum flow. Abrasion Resistant Glass Reinforced Polycarbonate Impeller for Reliability
3-year limited warranty.High performance; max. flow rate is 5100 Gallons Per Hour

SaleBestseller No. 5

Assembled in the us with foreign and domestic parts
Submersible cast iron and stainless steel sump pump with vertical float switch. CSA agency approved
Fully submersible,8 ft Water Resisitant Power Cord provides easy access to nearby GFCI protected outlet
1 hp; maximum flow rate is 6100 Gallons Per Hour, 5100 GPH at 10 feet of discharge lift
1-1/2 in. Npt discharge

SaleBestseller No. 6

I switch technology turns pump on and off by sensing the presence of water; removes water down to 3/8 in. Of surface
1/4 hp; max. Flow rate is 3000 gallons per hour; 1850 gph at 10 ft. Of discharge lift
Can be left unattended to remove water
Submersible reinforced sealed thermoplastic construction.Voltage:120V
The water level must be at least 1-3/4 inches for the pump to cycle, prime, and operate. Water levels less than 1-3/4 inches will not allow the impeller to contact water therefore no water will be pumped. Garden hose adapter

SaleBestseller No. 7

The pump should be unplugged once the water is no longer being moved, or pump will run dry.
Assembled in the US with foreign and domestic parts
Multi-flo technology allows easy selection of the appropriate discharge for the application
Top discharge is perfect for tight spaces where water removal is needed; window wells, buckets, etc.
Side discharge is ideal for easy water removal from flat open surfaces: flat roofs, flooded basements, standing water in yard, shower stalls, etc

Bestseller No. 8

SaleBestseller No. 9

1/2-horsepower submersible utility water pump can handle material up to 1/2-inch thick without clogging
Removes water within 1/8-inch of surface
Glass reinforced housing prevents rust
Connects to garden hose with 3/4-inch adjustable discharge adapter
1-year limited warranty.Requires 2 5/8 inch of water to prime

Bestseller No. 10

720-Gallons per hour at 10-feet of lift and maximum flow is 1750 gallons per hour
Corrosion resistant thermoplastic construction
Alarm sounds to notify you when the backup system is active
Requires one 40-ampere hour or one 75-ampere hour battery
1-Year limited warranty