Our Top 10 Recommendations for Sump Pumps Under $250

Up-to-date pricing and reviews for sump pumps under $250 on the market

SaleBestseller No. 1

1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height
Tough thermoplastic construction; 10' cord length
1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
Removable suction screen and handles up to 1/8 inch solids
Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

Bestseller No. 2

Bestseller No. 3

POWERFUL SUMP PUMP:750 Watt, 1 HP motor. Max Lift: 16 Feet; 3302 Gallon Per Hour rating tackles any draining job at a fraction of the time. This pump easily passes solids up to 1" in diameter. GREAT for flooded area, swimming pools, cellars or garden pond.
MULTI OUTLET SIZE: Submersible Water Pump is equipped w/ screw thread in GHT 3/4" or NPT5/8". Three fittings with different diameters for outflow( GHT 3/4", NPT 1", φ38, G 1-1/2") to choose from according to the flow rate.
AUTO FLOAT SWITCH:Start/stop automatically. When water level is below 4.7 inch, it will automatically disconnect the power; when water level rises above 4.7 inch, the pump will start again. Cut off immediately when pump fails to pump water to prevent the coil from getting burned.
HIGH-QUALITY MATERIALS:Thermoplastic composite material is highly rugged. Designed and manufactured in line with the valid safety requirements. Thermoplastic body resists corrosion as there are not exposed metal parts. Lower noise and energy-efficient. Oil free motor requires no maintenance.
GREAT FOR DRAINING:Great to Drain the Dirty Water from the Pond, Garden Pond, or Water Tanks. Great to move water for garden irrigation or cleaning your yard or road.

Bestseller No. 4

Assembled in the US with foreign and domestic parts
Top suction pump design minimizes air locks and clogging from debris in bottom of sump pit.Assembled in us, with foreign and domestic components
Stainless steel motor housing and rugged, cast iron pump base
Vertical float switch, tested to 1 million cycles!4600 GPH at 10 ft. of discharge lift
1-1/2 In. NPT Discharge for compliance with building codes

Bestseller No. 5

1/3 HP Sump pump moves up to 2,760 gallons per hour; pump will lift water up to 25' of vertical height
Rugged cast iron construction; 10-foot cord length
Vertical float switch to automatically turn the pump on/off. Switch on and off point is 6 and 2 inches
1-1/2 inch NPT discharge for high capacity pumping
Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

Bestseller No. 6

⚡⚡【Kindly Tip】When you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape.⚡⚡
🔥【1HP High Power】Prostormer Sump Pump uses 1HP power, which is more efficient than ordinary 3/4HP sump pump; Max 3700 Gallon Per Hour rating tackles any draining job at a fraction of the time.
🔥【Multi Outlet Sizes】3 different diameters outlets (1 inch ,1-1/4 inch, 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be.
🔥【Keep Open Mode】When you put the float switch locked on the sump pump, the sump pump will keep working all the time. Once the pump can not pump any water, you should cut off the power immediately to prevent the coil from getting burned.
🔥【Automatic ON/OFF Mode】The float switch should be unlocked from the pump. When the water level rises above the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power.

Bestseller No. 7

Assembled in the us with foreign and domestic parts
Submersible cast iron and stainless steel sump pump with vertical float switch. CSA agency approved
Fully submersible,8 ft Water Resisitant Power Cord provides easy access to nearby GFCI protected outlet
1 hp; maximum flow rate is 6100 Gallons Per Hour, 5100 GPH at 10 feet of discharge lift
1-1/2 in. Npt discharge

Bestseller No. 8

Assembled in the US with foreign and domestic parts.
Cast iron pump housing for durability
Mechanical float switch provides reliable operation and allows installation in sump basins 11" in diameter or larger
Top suction strainer filters debris and protects pump from clogging
High capacity 1-1/2" npt discharge

Bestseller No. 9

1/2 HP submersible sump pump made of durable cast iron
Assembled in the USA with foreign and domestic parts
Ceramic mechanical seal for work in demanding environments
1-1/2-inch discharges for maximum flow. Abrasion Resistant Glass Reinforced Polycarbonate Impeller for Reliability
3-year limited warranty.High performance; max. flow rate is 5100 Gallons Per Hour

Bestseller No. 10